Type C Female Seat Usage Instructions

1. Do not touch the support interface with your hands during the operation of the TYPE C female socket to avoid being scratched by the pin chip. Moreover, after the headphone jack is powered on, do not touch the interface of the headphone jack with your hand to avoid potential electric shock accidents.

2. When working on the TYPE C socket, do not exceed the specified rated current. If the rated current is exceeded, it may cause some components inside the USB socket to age faster, which may result in data transmission interruption or abnormal faults during use. In severe cases, it may directly damage the TYPE C socket and render it unusable.

3. After each use of the TYPE C female socket, be careful to unplug the USB plug, otherwise there will still be a certain amount of current at the headphone plug. Over time, it is easy to accelerate the aging of the transmission chip of the TYPE C female socket, which will affect the performance and use of the USB female socket. Moreover, when the TYPE C female seat is not in use, remember to cover the dust cover to prevent excessive dust accumulation, which can also affect the performance and use of the TYPE C female seat.

4. Regarding the electrical strength, also known as withstand voltage, of the TYPE C socket, it mainly refers to the voltage that the conductors in contact with the TYPE C socket can withstand. So the voltage resistance of the general TYPE C female socket cannot be less than AC500V, otherwise the conductors between the USB female sockets may not be compatible with the load when the device operates at a relatively high voltage, which may directly lead to the possibility of burning out. Therefore, please pay attention to this point when using the USB female socket.